con-rgb.jpg (40175 bytes) 

       Home | Contact Us | Where to Buy | Tech Support | About Us

  Connectivity Equipment Specialist


Products Print Servers

1-Port Wireless Pocket Print Server
(USB Port)
Model# PUN1000W

 
  • IEEE802.11b Standards compliant
  • Support TCP/IP, NetBEUI, IPX/SPX, LPR
    AppleTalk network protocols
  • Support Internet Printing Protocol (IPP)
  • Support SNMP
  • Bi-Direction Support
  • Attach to printer's USB port
  • Support Peer-to-Peer & Client-Server based network printing
  • Support major Operating Systems -
    Windows 98/Me/NT/2000/XP, Netware (Bindery/NDS), Mac OS 8.0 or higher & Unix/Linux
  • Web-Based Management & Setup wizard
  • Support DHCP Client protocol
  • Flash memory for firmware upgrades
  • Built-in Reset button
  • 1 Year Warranty

Share your printer cable free!  Place your printer anywhere at home or in the office!  

PUN1000W is the world's smallest wireless USB print server designed to provide wireless data transmission up to 11Mbps.  This small pocket size print server attaches to printerís USB port .

PUN100W provides multi protocol support (TCP/IP, IPX/SPX, NetBEUI, LRP, AppleTalk)  and works with all leading network operating systems including Microsoft Windows 98/Me/NT/2000/XP, Novell NetWare 3.x or higher, UNIX/Linux and Mac OS 8.0 or higher. 

Installing and Managing of PUN1000W is simple using the Setup Wizard and its web  based management utility program.  PAN1000W also has built-in Flash memory for smooth firmware upgrade if needed.

Other Features

Internet Printing Protocol (IPP) - PUN1000W supports IPP.  Using the appropriate software on your system,
you can create an IPP print path from your systems as Windows PC over the Internet.

Network Configuration - PUN1000W provides an embedded web server that can be accessed via a standard web browser (e.g. IE).  In addition, PUN1000W also provides a Windows based PSAdmin utility which help administrator to setup the print server environment.

SNMP Support - A standard SNMP agent is permanent on PUN1000W.  Any standard SNMP based application can be used to access and manage PAN1000W.

Built-in reset button - PUN1000W has a built-in reset button to allow user's to set PUN1000W back to
the factory default status.

Specifications

MODEL NUMBER

PUN1000W
Wireless Specifications  

Standard

IEEE802.11b


Radio Frequency


2.4GHz 


Media Access Control


CSMA/CA

Network mode


Ad-Hoc / Infrastructure


Data Transfer Rate


11,5.5,2,1M 

Output Power
+13 ~ +17dBm

WEP Encryption

64/128 bit

Typical Operating Range:
Indoor 120ft/11M
250ft/5.5M
350ft/2M
450ft/1M

Outdoor

800ft/11M
1100ft/5.5M
1300ft/2M
1600ft/1M

Printer Hardware

 

Dimensions (inches)

2.9x2.5x1.2

Direct Attached

Yes

# of Printer Ports

1 USB 1.1

Printer Connector

1 USB 1.1

Network Speed

up to 11M

LEDs WLAN/Status
Normal/Diagnostic Mode DIP switch
POST (Power On Self Test) Yes
External Power Adapter 3.3VDC/2.0A

Flash Memory Upgrade

Yes

Network Protocol Support

 

IPX/SPX

Yes

TCP/IP

Yes

NetBEUI

Yes

LPR Yes
AppleTalk Yes

Network OS Environment

 

98/Me/NT/2000/XP

Yes

NT/2000 Server

Yes

NetWare Binary Mode

Yes

NetWare NDS Mode

Yes

NetWare Remote Printer

Yes

TCP/IP Remote Printing

Yes

Mac  OS 8.0  or higher Yes  

Unix LPR Printing

Yes

Administration

 

Windows Configuration Utility

Yes

Web based Management

Yes

SNMP Protocol

Yes

Others

 

Internet Printing

Yes

DHCP Client

Yes

CD-ROM

Yes

Weight

66g

Certification

CE&FCC

 

About Us | Products | Where to Buy 
HomeTech Support 


Copyright 2003, ConnectGear, Inc.  All rights reserved.