con-rgb.jpg (40175 bytes) 

       Home | Contact Us | Where to Buy | Tech Support | About Us

  Connectivity Equipment Specialist

 

Products 10Base-T Hubs

5-Port Palmtop Ethernet Hub
Model# GH-T05P
(Discontinued)

 
  • Five 10Mbps RJ45 UTP Ports
  • Complies with IEEE 802.3 10BaseT Standard
  • Provides One Uplink Port
  • Palmtop Size

ConnectGear's GH-T05P is one of the most compact 10Base-T hubs in the market while delivering a straight forward solution for expanding additional nodes. As long as there is existing 10Base-T drop, you can easily expand to add one to four nodes without extra wiring cost. The saving is tremendous when considering the labor cost involved.

Although it's small in size, the hub supports all the features of a full-sized, standard 10Base-T hub, including automatic port partition, jabber function isolates network failure, polarity detection & correction, uplink port, and extensive diagnostic LED's.

By incorporating shielded connectors design, the GH-T05P not only provides the ultimate reliability to the network transmission but also minimizes noise emission. Cabling requirement is not restricted to shielded twisted pair cable, one can use unshielded twisted pair cable if so desire.

Handy and low cost, the GH-T05P is your convenient node expander.

Key Features

Specifications


About Us | Products | Where to Buy 
HomeTech Support



Copyright 2001, ConnectGear, Inc.  All rights reserved.